Services

Door-To-Door Fence and Fencing Product Delivery To Your Jobsite

Request A Quote    Literature Request    Our Newsletter    Contact Us

Areas Serviced & Delivered to:
Nassau County   |    Suffolk County

We aim to deliver your goods to you within 30 days of accepting your order, most orders will be delivered in 7 to 10 days but this is dependent on your location and the current stock availability which can vary due to seasonal factors and raw material factors. Delivery charges vary depending on the value of your order and your postcode and cannot be refunded unless the goods you ordered were delivered damaged or faulty.

How We Deliver
We typically deliver goods using own fleet of Precision Fence vehicles with the Precision Fence team.
Please note:

• If access to your delivery address is restricted, please let us know when speaking to the delivery team.

• Our drivers will make every effort to deliver the goods as close as possible to the desired destination on your property. If that is not possible  due to road surface or other conditions, our drivers are instructed to unload the goods beside, or close to, the vehicle on firm ground.

• If you are concerned this leaves your goods in an insecure location, please inform our head office transport team as soon as reasonably possible to discuss an alternative delivery time, when you can ensure you have arranged for someone to help move your goods to a secure location.
How long after you place an order can you expect delivery?
We aim to deliver your goods to you within 30 days of accepting your order. Standard stocked items would normally be delivered the next time we are scheduled to deliver in your area.

We will do our best to fit our delivery schedule around your requirements.

If you have a specific deadline please talk to one of our Sales Team  631.563.8488.

Do you have to be in when we deliver?
Not necessarily, if you are happy for us to leave the goods. 
Please note that once the goods have been delivered to your premises, ownership and liabilities arising from ownership transfers from us to you.

Delivery Notifications
We will advise your approximate delivery date/time by Telephone. If after a delivery notification you are unable to receive a delivery, please inform our head office transport team as soon as reasonably possible  631.563.8488 to discuss alternative arrangements.

When you order fence from Precision Fence, it will be delivered common carrier, but it will not be deposited on your door step like a typical “delivery.” Someone will need to be at your location. All of your parts will be boxed and easy to unload. If you any questions about the size or packaging of your order, we’ll do our best to provide answers or address your concerns. As always, feel free to contact us and let us know what’s on your mind!

Do-It-Yourself Chain Link Fence Installations by Precision Fence Company

Request A Quote    Literature Request    Our Newsletter    Contact Us

Fence Installation Guidelines

Chain-link Fence Installations

1. Find out exactly where you would like to place your fence and mark it.

2. Set a nylon string for a guide string to be placed exactly where you would like your fence to be placed.

3. Tighten string to minimize any sway or say in string line.

4. Dig first hole and set post in the ground 2" higher than actual fence height. This is done for all corner and end posts. Cement post.

5. Allow posts to cure.

6. String a fence line from end post to end post measuring 2 inches lower than height of fence to allow loop caps to go onto line post to.   Bring it back up to required height. For example a four foot chain link fence would require 46" line post and 50" terminal post heights. When using 1 fence post for multiple direction it may require to leave an extra inch higher for room of extra hardware. Space posts 10 ft. apart or less.

7. Allow posts to set.

8. Install all tension bands (hold wire on) and brace bands (hold top rail on) onto Terminal Posts.

9. Install loop caps on line posts.

10. Install top rail and cut to fit.

11. Attach wire using tension bar, nuts, and bolts. Use 1 tie per ten feet directly after each line post in direction in which fence will be stretched.

12. Using 2 tension bars and a winch stretch chain link until the links are no longer easy to pull together.

13. Attach wire to Terminal Post  using nuts, bolts and tension bar.

14. Release tension.

15. Tie fence to posts and top rail using fence ties.

16. Look over fence and make sure all caps and fitting a secure.

17. Enjoy your new fence.

Chain link Gates
A chain link gate is often made to the opening desired.

Example: A four foot wide gate would have an opening of 4 foot between each gate post. etc. etc.  5 ft. 6ft.

Commercial Fence Installations By Precision Fence Company

Request A Quote    Literature Request    Our Newsletter    Contact Us

Precision Fence understands the unique needs of your business.  Commercial and Industrial fencing requires extensive product knowledge and expert examination of your specific requirements.  We have many years of professional experience providing our customers with security solutions that not only perform beyond expectations, but look great, and last for decades.  We have a multitude of specialized equipment and experience that make us the premier contractor in Long Island when it comes to large-scale commercial installations.  Choose Precision Fence  for your next commercial fencing project, we can meet any specification and complete your job on time, and on budget.

Some commercial installations include:

• Chain Link

• Gate Automation

• Ornamental Steel

• Guard Rail

• Sound Barriers

• Bollards
Railings
• and many more!